1. |
Kumar,A., Saini,R.P., and Saini,J.S |
Development of correlations for Nusselt number and friction factors for solar air heater with roughened duct having multi V-shaped with gap ribs as artificial roughness |
Renewable Energy |
2013 |
151-163 |
2. |
Kumar M, Ojha C, Saini J.S |
Analysis of evaporation data under roughness induced wind flow |
Journal of Hydrologic Engineering |
2013 |
120-124 |
3. |
Sunil Chamoli, N.S Thakur |
Heat transfer enhancement in solar air heater with V-shaped perforated baffles |
Journal of Renewable and Sustainable Energy |
2013 |
231-236 |
4. |
Manoj Kumar,C.P.S.Ojha, and J.S.Saini |
Variability of mass transfer coefficient with roughness elements and approach flow velocity,Prc. EWRI-2013 |
Duke University,Cincinatti,Ohio,USA |
2013 |
173-179 |
5. |
Prof. J.S Saini |
Effect of open area ratio on thermo hydraulic performance of V shaped perforated blocks in a rectangular air duct” 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference |
IIT Kharagpur, India |
2013 |
129-135 |
6. |
T.Alam, R.P.Saini and J.S.Saini |
Experimental investigation on thermohydraulic performance of a rectangular air heater duct equipped with V-shaped perforated blocks |
Advances in Mechanical Engineering |
2014 |
20-23 |
7. |
A.K Patil, A Dixit |
Heat Transfer Characteristics of Grooved Fin under Forced Convection |
Heat transfer Engineering |
2014 |
125-130 |
8. |
A.K Patil, J.S Saini, K. Kumar |
Experimental investigation of enhanced heat transfer and pressure drop in a solar air heater duct with discretized broken V-rib roughness |
Journal of Solar Energy Engg. (ASME) |
2014 |
116-120 |
9. |
Kumar M, Ojha C, Saini J.S |
Investigation of evaporative mass transfer with turbulent forced convection air flow over roughness elements |
Journal of Hydrologic Engineering |
2014 |
110-115 |
10. |
Kathait P., Patil A. K., |
Thermo-hydraulic performance of a heat |
Applied Thermal Engineering (Elsevier), |
2014 |
162–170 |
11. |
Vipin B. Gawande, A. S. Dhoble, D. B. Zodpe, Sunil Chamoli |
Experimental and CFD-based thermal performance prediction of solar air heater provided with chamfered square rib as artificial roughness |
Journal of Brazilian Society of Mechanical Science and Engineering Spinger and Francis |
2015 |
110-114 |
12. |
Singh P., Patil A. K |
Experimental Investigation of Heat Transfer Enhancement through Embossed Fin Heat sink under Natural Convection |
Experimental Thermal and Fluid Science |
2015 |
136-141 |
13. |
Dixit A., Patil A. K |
Heat Transfer Characteristics of Grooved Fin under Forced Convection”, Heat Transfer Engineering |
Tailor and Fransis |
2015 |
97-103 |
14. |
Vipin B. Gawande, A. S. Dhoble, D. B. Zodpe, Sunil Chamoli |
Experimental and CFD-based thermal performance prediction of solar air heater provided with right-angle triangular rib as artificial roughness |
Journal of Brazilian Society of Mechanical Science and Engineering Spinger and Francis |
2015 |
110-113 |
15. |
Singh P., Patil A. K |
Experimental Investigation of Heat Transfer Enhancement through Embossed Fin |
Experimental Thermal and Fluid Science |
2015 |
54-59 |
16. |
Rajesh Maithani, JS Saini |
Heat transfer and friction factor correlations for a solar air heater duct roughened arti?cially with V-ribs with symmetrical gaps |
Experimental Thermal and Fluid Science |
2016 |
220-227 |
17. |
Prashant Kumar, Alok Kumar, Sunil Chamoli |
Experimental Investigation of Heat Transfer Enhancement and Fluid Flow Characteristics in a Protruded Surface Heat Exchanger Tube |
Experimental Thermal and Fluid Science |
2016 |
42-51 |
18. |
Vashistha C., Patil A. K., Kumar M |
Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts |
Applied Thermal Engineering |
2016 |
134-139 |